Autopaint Solutions (UK) Ltd

ADHERTO^® AP01 ADHESION PROMOTERS
To ensure proper adhesion of automotive paint to: plastics, metals, chrome, or a variety of other surfaces use our ADHERETO^® adhesion promoter. ADHERETO^®can also be used for between coat adhesion, when one paint has dried or for difficult sanding situations. Ready for use. Clear in colour.

FLATTENING AGENT (FAO1)

FA01 is designed to reduce the gloss of acrylic lacquer and polyurethane enamel topcoats and clears. FA01 will not affect adhesion or hardness. You can vary the amount of gloss reduction (from 10% to 99%) depending on the amount of FLATTENING AGENT used. FA01 is great for undercarriages, frames and engine parts where high gloss is not desired, but a tough, durable finish is.

WAX & GREASE REMOVER (KC10)

KC10 removes grease, wax, silicone, adhesives, tar, tree sap, insects and dirt. It is a fast flashing product designed to help speedup initial surface preparation before beginning sanding and body work.

POST SANDING CLEANER (KC20)

KC20 removes sanding residue as well as dirt and light contaminants, such as hand oil. KC20 is designed for use after KC10 and final surface preparation.

DIRECT TO METAL PRIMERS & ACTIVATORS (KD2000 & KDA2000 SERIES)

KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These primers emit very low amount of Volatile Organic Chemicals (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. KD2000 may be applied to properly cleaned and sanded aluminium, steel, galvanized steel, sand blasted steel, fiberglass and SMC. It can be reduced up to 10% with RU reducer. Mix 4 parts KD2000 to 1 part KDA2000 to 1 part RU Series Reducer.

KE170 KRATOR ELIMINATOR (KE170P)

KE170 is a fisheye additive that doesn't need to be used in every coat. It corrects fisheyes or crater defects, and works with lacquer, urethane, acrylic enamel, acrylic urethane, polyurethane, etc.

CHROMATE FREE EPOXY PRIMER (KP2CF)
KP2CF is designed to work over properly prepared aluminium, magnesium, fiberglass, galvanized steel, OEM finishes, and some woods and plastics. It's strong adhesion, fast build, and ease of sanding (wet or dry), make it a logical choice for the base of a lasting paint job. It may also be applied to repair areas for fast filling touch-ups.